Browse all practice questions for the Quantitative Business Analysis (QBA) Exam 2 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Quantitative Business Analysis (QBA) Exam 2 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • The Central Limit Theorem suggests that for any population distribution, the distribution of the sample mean becomes normal as the sample size increases.
  • The standard deviation of all possible values of the sample mean is called the standard error.
  • Compute EOQ given D=1000, S=50, H=2.
  • Under the Central Limit Theorem, as the sample size increases, the distribution of the sample mean becomes approximately normal with mean equal to the population mean and standard deviation equal to
  • Which of the following describes a continuous random variable?
  • Which statement about the normal distribution is incorrect?
  • Which method uses resampling to estimate the sampling distribution for confidence intervals?
  • The shape of the t-distribution as degrees of freedom increase
  • What is the purpose of a confidence interval?
  • What is the relationship between standard deviation and variance?
  • What is the weighted average of all possible values that the random variable can take, with the weights being the probabilities of those values?
  • The distribution that is symmetric and bell-shaped but with thicker tails and that approaches the Z-distribution as degrees of freedom increase is the
  • What is the general form of a simple linear regression model?
  • What does an R-squared value close to 1 typically warn about in regression analysis, especially with a small sample or many predictors?
  • An R-squared of 0.85 indicates what about the model's explanatory power?
  • A VIF value greater than 5 signals concern for multicollinearity.
  • What represents the amount by which the sample statistic may differ from the true population parameter?
  • Within 2 standard deviations of the mean in a normal distribution, approximately what percent of data lie?
  • Explain interaction terms in regression.
  • Which function describes the distribution of probabilities for discrete random variables?
  • For a continuous variable, the probability that X lies in an interval [a, b] is given by which of the following?
  • A company measures the amount of time customers wait in line before being served. This variable is best classified as:
  • Which characteristic applies to the normal distribution?
  • Which statement correctly describes the Central Limit Theorem?
  • The observed value of a statistic is never exactly equal to the true parameter. Which word completes the sentence: the observed value is ______ equal to the true parameter?
  • Which pair correctly describes a population parameter and a statistic?
  • In ANOVA, besides Levene's test, which other test can be used to assess equal variances across groups?
  • Which function is used to describe the distribution of probabilities for continuous random variables?
  • The ________ of a random variable X, denoted σX, is simply the square root of the variance
  • Which statement best distinguishes correlation from causation?
  • What is the formal purpose of the F-statistic in ANOVA?
  • For a continuous random variable, the probability that X equals a specific value is?
  • According to the Central Limit Theorem, as the sample size increases, the distribution of all possible sample means tends to be
  • Which term describes a numerical value computed from sample data to estimate a population parameter?
  • For a 95% confidence interval for the population mean, if the population standard deviation is known, the standard normal distribution should be used.
  • The Empirical Rule applies to which type of distributions?
  • What is the objective of an EOQ model in inventory management?
  • What does the reduced cost of a non-basic variable indicate in linear programming?
  • Which statement best describes service level in inventory management?
  • If the demand rate doubles, how does EOQ change?
  • Consistency of an estimator concerns behavior of the variability of estimates as the sample size approaches infinity.
  • A retail store tracks the number of customers entering each hour and the amount each customer spends. Which of the following correctly classifies the variables?
  • How is a forecast interval around a time series point forecast constructed?
  • Which statement correctly expresses the power of a statistical test?
  • A confusion matrix in binary classification is used to compute which metrics?
  • If the confidence level increases, what happens to the width of the CI?
  • The Normal distribution, also known as the '______ ______', is the most commonly used statistical distribution.
  • R-squared expresses what aspect of a model?
  • RMSE stands for what metric?
  • Which statement about the standard error of the mean is true?
  • In regression analysis, which statement best describes an outlier and its handling?
  • MAPE stands for which measure?
  • Between the z-distribution and the t-distribution, which statement is true as the degrees of freedom increase?
  • According to the Empirical Rule, what percentages lie within 1, 2, and 3 standard deviations?
  • Continuous random variables have what kind of outcomes?
  • If sample size increases, what happens to the width of the CI?
  • Which statement best describes the concept of leverage in regression analysis?
  • Which of the following statements correctly describes AIC and BIC as model selection criteria?
  • Which statement is true about the effect of increasing sample size on confidence interval width?
  • Which type of estimator has a standard deviation that does not converge to 0 as the sample size increases, meaning more data does not make estimates more precise?
  • What does the confidence level represent in a confidence interval?
  • Which statement about confidence-interval width is true?
  • What is the feasibility region in linear programming?
  • Which test is used to test for equal variances across groups in ANOVA?
  • How do you compute EOQ?
  • What is a residual plot useful for?
  • In the context of probability distributions, which term specifically refers to the 'location' of the distribution?
  • In optimization, what is the purpose of sensitivity analysis?
  • What is the primary purpose of randomization in experiments?
  • As the level of confidence increases, with everything else held constant, the width of a confidence interval will
  • As the sample size increases, the standard error decreases.
  • This is the statistical shorthand notation for? X ∼ N (μX, σX)
  • Which principle describes the distribution of the sample mean regardless of the population distribution?
  • Which statement about adjusted R-squared is true?
  • The standard deviation is a more intuitive measure of spread because it is expressed in the _____ units as the random variable X, whereas the variance is expressed in ______ units.
  • In a regression model that includes a dummy variable for a categorical group, what does the dummy coefficient typically represent?
  • As degrees of freedom increase, the t-distribution becomes more like which distribution?
  • Which term describes a range of values derived from sample data that is used to estimate a population parameter with a certain level of confidence?
  • A residual plot showing increasing spread with fitted values indicates what?
  • The standard deviation can be negative for a continuous random variable.
  • What does EVPI stand for in decision analysis?
  • A firm's daily revenue (in thousands of dollars) has an expected value of 40. This means:
  • When the population standard deviation is known, the confidence interval for the mean uses the
  • A 95% confidence interval for a population mean is constructed with known sigma. Which formula is correct?
  • A probability density function over its entire domain must integrate to what value?
  • What is the role of safety stock in achieving service level?
  • Which term describes an estimator that is unbiased?
  • If variability increases, the width of a confidence interval will generally:
  • Describe the concept of confidence interval width and its dependence on sample size.
  • Which statement describes discrete random variables?
  • What is the Z critical value used for a 95% confidence interval in large-sample approximation?
  • If the variance of a normal distribution increases, what happens to the shape of the distribution?
  • The standard error is defined as the standard deviation of the sampling distribution of the sample mean.
  • Which of the following pairs are sufficient to specify a normal distribution?
  • Which statement describes the conditions for a valid PDF?
  • A continuous distribution is completely defined by the:
  • A continuous random variable may assign positive probability to a single exact value.
  • Under the central limit theorem, what happens to the t distribution as the degrees of freedom increase?
  • As the sample size increases while keeping other factors constant, the margin of error will
  • In a normal distribution, increasing the expected value shifts the curve horizontally but does not change its shape.
  • An actual number calculated from actual data points is called what?
  • The distribution Z ∼ N(0, 1) is known as the
  • A consistent estimator is one whose estimates converge to the true parameter as sample size grows.
  • Which of the following is an assumption of linear regression?
  • Confidence level is 1 − α where α is the ______.
  • A normal distribution is determined by two parameters.
  • If a population distribution is known to be normally distributed, the sample mean must be equal to the population mean.
  • What is the basic idea behind linear programming?
  • Which test is commonly used to detect heteroscedasticity in regression models?
  • What is the difference between Bayesian and frequentist interpretations of probability?
  • The Central Limit Theorem describes the behavior of:
  • The Central Limit Theorem only applies to populations that are normally distributed.
  • With a PDF, probabilities are calculated by finding areas ___________ ____ ________.
  • What gives us an idea of how spread out the possible values of the random variable are?
  • Which statement describes the normal distribution?
  • Which statement about the standard normal distribution is true?
  • For very large samples, the z-distribution can be used even if the population standard deviation is unknown.
  • True or False: The t-distribution becomes more similar to the standard normal distribution as the sample size increases.
  • What is the purpose of a decision tree in quantitative business analysis (QBA)?
  • Which statement about holding cost and EOQ is correct?
  • The standard error of the mean decreases as sample size increases because it is proportional to 1/√n.
  • In the described sample of diamonds, which statement is accurate?
  • In binary classification, which metric measures the true positive rate?
  • What is safety stock and when is it used?
  • If the population is normally distributed, the sampling distribution of the sample mean is normal regardless of the sample size.
  • In a normal distribution, X ∼ N(μX, σX) indicates that X is distributed with which two parameters?
  • What does homoscedasticity refer to in regression analysis?
  • When is a t-test preferred over a z-test?
  • The standard deviation of a continuous random variable is
  • Which statement best describes multicollinearity's effect on regression coefficients?
  • What is the purpose of residual analysis in regression?
  • Which parameter is μX?
  • In a standard normal distribution, what are the mean and standard deviation?
  • The normal distribution is often described as having which shape?
  • What tells us the center of the distribution?
  • The Central limit applies to samples that are:
  • In time series forecasting, what is the principle of simple exponential smoothing?
  • For continuous random variables, we use which function?
  • For a 95% confidence interval of a population mean with known sigma, which critical value is used?
  • Which of the following defines the power of a statistical test?
  • Which of the following characteristics describe the Normal distribution?
  • If the population is normally distributed, the sampling distribution of the sample mean is normal for any sample size.
  • How is the Expected Monetary Value (EMV) calculated in a decision tree?
  • If residuals are not normally distributed, which assumption is violated?
  • As the sample size grows large, the t-distribution becomes more like the standard normal distribution.
  • Which expression defines the Expected Value of Perfect Information (EVPI)?
  • Which statement best describes the central limit theorem?
  • What is a common rule for selecting a forecasting model using error measures?
  • At alpha = 0.05, in a two-sample t-test for means, if p <= alpha, what is the conclusion?
  • If p-value is greater than alpha, what is the correct conclusion?
  • Which statement defines a consistent estimator?
  • How does Holt's linear method extend simple exponential smoothing?
  • Which of the following is true about the two-parameter normal distribution?
  • Which statement is true about AIC and BIC as sample size grows?
  • Which type of estimator has the standard deviation converge to 0 as the sample size grows?
  • What is statistical power?
  • The area under the probability density function between two values represents the probability that a continuous random variable falls within that interval.
  • In time series forecasting, which data pattern is simple exponential smoothing best suited for?
  • Which statement best describes the fundamental difference between Bayesian and frequentist probability interpretations?
  • An actual number; an estimator represents a potential number. Which pair is correct?
  • The term used for a computed value that estimates a population parameter is
  • A ____ describes how probability is distributed across values of X.
  • Which statement best describes the difference between parametric and nonparametric tests?
  • For discrete random variables, what is the name of the probability formula?
  • When the population standard deviation is unknown and the sample size is moderate to large, the t-distribution should be used.
  • The probability that a continuous random variable equals a specific value c is always 0.
  • Which are the three factors that affect the width of a confidence interval?
  • A 95% confidence interval for a population mean with unknown sigma is constructed using the t distribution. Which is correct?
  • What is the standard deviation of the sampling distribution of the sample mean called?
  • The expected value (or mean) provides which of the following?
  • Which parameter is σX?
  • Which statement best describes the Central Limit Theorem's general claim?
  • What is P(X = c) if X is a continuous random variable?
  • Which statement best captures the purpose of stepwise regression and why is it controversial?
  • True or False: The t-distribution becomes more similar to the standard normal distribution as the sample size increases.
  • Which statement describes the relationship between sample size and the standard error of the mean?
  • An observed value that can provide us with some idea as to what a parameter is equal to is called what?
  • Which statement correctly defines Type II error and the relationship to power?
  • Margin of error is computed by multiplying the standard error by a critical value from distributions such as the Z or t distributions. Which options best describe the source of the critical value?
  • Which value does the total integral of a density function over its domain equal?
  • Which statement is true about confidence intervals when the population standard deviation is unknown?
  • What is the role of dummy variables in regression?
  • What does N(0,1) denote in the context of standard normal distribution?
  • What is the simplex method in linear programming?
  • The Central Limit Theorem is applicable provided the sample size is sufficiently large.
  • What does the shadow price (dual value) in linear programming represent?
  • Which term is used interchangeably with the mean?
  • When should the t-distribution be used instead of the normal distribution for confidence intervals?
  • Which statement is true about the two-parameter normal distribution?
  • An estimator is a function of random variables used for estimating a parameter. It can be thought of as the rule that creates an estimate. Which term matches?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy